PETEC K&D Body Adhessive and Sealant 310ml

Quantity: 1
Size: 310 ml cartridge

Colour: Black
Temperature resistance: –40°C to +90°C
Processing temperature: +5°C to +35°C
Processing time: 10-15 minutes
Curing time (at +22°C): approx. 4mm/24 hours (depending on temperature and coat thickness)
Processing time: 10 – 15 minutes

Characteristics:
wide adhesion spectrum, strong adhesion
capable of sealing gaps of different sizes
permanent sealing effect, permanently elastic and vibration-resistant
can be re-coated, silicone free, weatherproof and UV-resistant
non-corrosive, resistant to diluted acids and alkali solutions

Fast curing, elastic single-component adhesive and sealant on a polyurethane base, which hardens due to humidity.

Thoroughly clean and degrease the surfaces with PETEC Multi Cleaner (art. no. 82100 or 82200). Remove the cap, pierce the film, cut the nozzle and screw on. Apply the product using an applicator gun and bond.
Surplus material can be removed with PETEC Multi Cleaner. Only after complete curing can K & D be re-coated with suitable products. Paints, varnishes or other media containing solvents may inhibit or ruin the curing process.
Always carry out tests in order to ensure the suitability of the product for the application in question.
Observe the safety and technical datasheet!

94730_Technical Data Sheed
94730_Safety Data Sheed

Shelf Life: 18 months